CTS Push-pull Pots, DPDT

CTS Push-pull Pots, DPDT

CTS Push-pull Pots, DPDT Split shaft, 250K-ohm (CTS #450S 3908)

Split shaft, 250K-ohm (CTS #450S 3908)

Item # 0227
In stock, ready to ship!

$8.95

+
CTS Push-pull Pots, DPDT Split shaft, 500K-ohm (CTS #450S 3910)

Split shaft, 500K-ohm (CTS #450S 3910)

Item # 0228
In stock, ready to ship!

$8.95

+
CTS Push-pull Pots, DPDT Long split shaft, 500K-ohm (CTS #450S 3912)

Long split shaft, 500K-ohm (CTS #450S 3912)

Item # 0229
In stock, ready to ship!

$9.95

+
CTS Push-pull Pots, DPDT Solid shaft, 250K-ohm (CTS #450S 3909)

Solid shaft, 250K-ohm (CTS #450S 3909)

Item # 0227-S
In stock, ready to ship!

$8.95

+
CTS Push-pull Pots, DPDT Solid shaft, 500K-ohm (CTS #450S 3911)

Solid shaft, 500K-ohm (CTS #450S 3911)

Item # 0228-S
In stock, ready to ship!

$8.95

+
 
Total:
Qty:
Scroll to Top

CTS Push-pull Pots, DPDT

About This Item

Add a switch without adding a hole. Sized to fit more guitars.
On these top quality CTS control pots, the switch contacts are on the side, not the back. This makes them shorter, so they'll fit most guitars without routing—only 1" cavity depth is needed.

The double-pole double-throw switch adds lots of wiring options. Pull the knob to coil-cut a humbucker, switch a pickup in/out, or control anything: the switch is electrically separate from the control pot.

CTS pots have long been the first choice in American guitars. CTS worked with StewMac to create these unique control pots. In addition to their space-saving size, they feature a longer-life brass shaft and tighter ±10% resistance tolerance compared to CTS products offered elsewhere.

Their precision audio taper gives smoother, more accurate response than you'll get with economy pots. The volume swells evenly from 0 to 10, with no abrupt changes.

Available with split shaft for fine-knurled (24-spline) knob, or with smooth shaft to fit a set-screw knob. The long shaft #0229 fits Les Paul® and other carved-top solidbodies.

Each CTS pot includes a flat washer, lock washer, and two hex mounting nuts for custom height adjustment on a pickguard or control plate.


Split shaft, fine knurling
Diameter
Height

0.235" (5.95mm)
3/8" (9.52mm)
Solid shaft
Diameter
Height

1/4" (6.35mm)
3/8" (9.52mm)
Thread 3/8" x 32
Thread height 3/8" (9.52mm)
Thread height, long shaft 3/4" (19.05mm)
Required mounting hole diameter    3/8" (9.52mm)
Required cavity depth 1" (25.4mm)

Which pot value should you choose?
500K pots are standard controls for humbuckers, and 250Ks are usually used for single-coil pickups. A 250K gives a slightly warmer tone than a 500K, and bleeds off (attenuates) some of the high frequencies to ground.

Replacement Mounting Nuts and Lock Washers are also available.

Trade Secrets!

Trade Secrets!

Upgrading control pots: choosing the right pots and knobs

Lots of low-cost guitars play great, even though the manufacturers cut costs on hardware and electronics. Swapping out your control pots is an easy mod with big results. Erick Coleman shows you how to avoid trouble…

Instructions

Product Instructions

Wiring the CTS DPDT Push-Pull Pot

How to wire the CTS DPDT Push Pull Pots.

Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
4.5
  • 4.45 average rating from 55 reviews
Sort by
5.0

SG

By

Verified Buyer


Just fits inside a 2018 SG. Works like a champ to toggle my mini buckers from series to parallel coils. Give me a nice clean and bright sound with a pull of the knob.

4.0

Pretty good !

By

Verified Buyer


A lot going on in a small package , I had no problem soldering the dpdt switch , it’s a tight fit but works great ! Most of the pot is plastic , there is metal to solder your grounds to but a small metal tab would make it easier. I will use this again

5.0

Perfect for my Projects

By

Verified Buyer


I bought a few of these for my Gibson's and they work perfect for what I Used them for.

5.0

CTS Push-pull Pots, DPDT

By

Verified Buyer


I bought a long shaft CTS Push-pull Pot for Phase Switching on my 2005 Gibson Les Paul Standard, putting the neck humbucker out of phase with the bridge humbucker. I needed this mod to get the Gary Moore out of phase sound. To be able to do the mod I also replaced the Gibson neck humbucker, which has only 2 wires, with a Seymour Duncan '59 humbucker which has 5 wires. I like the Stewart MacDonald pots because they are good quality with all that brass in them.

5.0

Great Pots

By

Verified Buyer


Best pot ever

3.0

Push Pull Review

By

Verified Buyer


Well, i never worked with older variations, but i think they would be easier to solder. This circuit board arrangement is very hard to work with if your using all the slots. Just my opinion and work preference. Also plastic back makes grounding a task. The pot itself works fine once the job is done, but next time i'll search for the old lug style.

3.0

Great idea, not so great execution

By

Verified Buyer


Bought this for a customers Les Paul we were doing a phase switch on. I was in love with the design and being able to have a full size push pull pot. But man. Those little holes you have to solder the wire in are... very little. Getting the iron and the wire and solder in that small of of a space proved very difficult. Made the job substantially more time consuming than normal. I just wish it was easier to solder. That would be fantastic.

Other than being difficult to install it worked and sounded great!

5.0

CTS push/pull potentiometers

By

Verified Buyer


These work great, well made and smooth. Slightly confusing connections but just read the diagram. Nicest push/ pull pots I've ever used on a project, very easy soldering too!

1.0

Poor quality

By

Verified Buyer


The shaft pulled right out. It still works but not worth the money.

Response from StewMac


Quality and 100% Total Satisfaction is our goal every day. If a product fails to work as intended in your shop, we'll take back the product and replace or refund. Call us at 1-800-848-2273 so we can make it right.

4.0

CTS 500k push pull! (Solid shaft )

By

Verified Buyer


These are great, smooth....with some nice resistance. Quality seems to be better than the older style cts.

Showing 10 of 55 Read more reviews >>
 


StewMac PDF Catalog, page 56 See CTS Push-pull Pots, DPDT
on page 56 of our StewMac Digital Catalog