Close

Golden Age Pre-wired Harness for Gibson® SG® with Push-pull Pots

4.0
  • 1 Reviews
  • Write a review
New!

Golden Age Pre-wired Harness for Gibson® SG® with Push-pull Pots

Item # 2046
In stock, ready to ship!

$82.05

+
 
Total:
Qty:
Scroll to Top

Golden Age Pre-wired Harness for Gibson® SG® with Push-pull Pots

About This Item

Make your Gibson® SG® more versatile! Our pre-wired harness with push-pull pots splits the coils of humbuckers for single-coil operation. For humbucking pickups with series link access (3 wire, 5 wire, etc).

Golden Age harnesses are assembled and soldered in the USA using top components, including Switchcraft switches and CTS pots for the best sound. Ready to drop into your guitar!

    Worth every penny!
  • Premium hand-wired for drop-in retrofit
  • Upgrade your old wiring
  • Save work and save time on new builds

Soldered in our Athens, Ohio shop
We professionally hand-soldered these harnesses using the best brand-name components for long life and great sound: CTS pots, Orange Drop® caps, Switchcraft™ toggle switch and output jack and cloth push-back wire.

Tested and 100% Guaranteed
Each Golden Age harness comes to you mounted on a reusable plywood template, which is a tool in itself: save it for future wiring jobs. The template holds the components correctly so the finished harness fits neatly into the guitar's wiring cavity. You simply solder your pickup lead wires to the harness.

Got questions? Call or email us. A friendly gearhead will be happy to help!

Qty Specs
1 Switchcraft long-thread output jack
2 .022uF Orange Drop Caps
1 Switch knob (amber)
1 Switchcraft 3-way right-angle switch
Switch length 2" (50.80mm)
Threaded portion 3/16" (4.76mm)
Required mounting hole dia. 1/2" (12.70mm)
Required body cavity depth 13/16" (20.64mm)
Requires at least 1-3/4" (44.45mm) from the center of the mounting hole to the edge of the control cavity for wiring clearance.
4 CTS 500K-ohm control pots
Shaft diameter 0.235" (5.95mm)
split shaft, fine knurling
Thread 3/8" x 32
Threaded portion 3/8" (9.52mm)
Required mounting hole diameter 3/8" (9.52mm)
Required cavity depth 1-3/16” (30.16mm)


Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
4.0
  • 4.00 average rating from 1 reviews
4.0

Excellent product, required a bit of work on the guitar itself

By

Verified Buyer


The wiring on this is great. Solder points are strong and all the components are high-quality. My only complaint is that due to the orientation of some of the pots (namely bridge volume), I had to drill out some space in the cavity in my SG to allow the pot to sit correctly. Turning it wasn't really an option with the length of the wires and orange drop caps. If the pot were oriented with the terminals facing away from the wall of the cavity before soldering, it would be no problem at all to install. Instructions were a tad ambiguous, which I suspect was to allow for different kinds of pickups so it's not a flaw really, but something to be aware of. When I matched them with Seymour Duncan's specs, it all made sense.

5 stars minus having to drill a bit out of my guitar to make it fit. Very happy with the sound I'm getting now and having all the components prewired made this a thousand times easier!